A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Text excerpt from page 39 (click to view)
DSC programming
DLAY (Delay) If an amplifier has been connected to the system, this setting can prevent the annoying power-on pop noise. Use the delay function to switch on the amplifier with a slight delay. �Delay 1� = 250 ms to �Delay 9� = 2.25 sec. delayed power-on. VOL (Volume) Select the power-on volume. Use / to adjust the desired volume level. If you use << to select �Last VOL�, the system will come on at the volume selected before it was switched off. SCAN (SCANTIME) Set the scan time for the Scan and Preset scan functions from 5 to 30 seconds. This setting is valid for the radio or CD scan. HP-F (High pass function) The proportion of low frequencies can be reduced. It is advisable to take advantage of this function when you have connected a subwoofer. Use / to select filters 1-5. Use << to switch the high pass function off.
KC (KeyCard)
Use this menu to make adjustments to the KeyCard settings.
READ To read out the KeyCard data. The card supplied with the radio is used to display the model name, type number (7 6..) and the serial number. With the extra card it is possible to display data entered by your specialised dealer. (See the section on �Short Additional Memory S.A.M.�). If you remove the KeyCard during the reading process, �Insert� will appear on the display panel. LRN (Learn) To �train� a second KeyCard. Please read the information in the section on �KeyCard theft protection system� �Training a second KeyCard�.
LED (Light Emitting Diode) When the audio system is switched off and the KeyCard has been removed, you can have the ON knob and an LED in the CD slot flash as additional theft protection. The flashing light is not visible unless the operating panel is open. LED off << >> LED on. Refer to the information in the section on �KeyCard theft protection system� - �Flashing light as theft protection�. TOM If you have a second KeyCard with a TurnOn Message, you can switch off this information with �TOM off�. The default setting is �TOM on�. TOM off << >> TOM on. For more information refer to � KeyCard theft protection system� - �Turn on Message (T.O.M.)�.