High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
Text excerpt from page 36 (click to view)
EQUALIZER
Making adjustments � Press and hold down the AUDIO button : for longer than two seconds. You can use the quality factor to adjust the width of the filter. The higher you set the value for the quality factor the more directly the filter will be applied to the selected frequency. To adjust the quality factor,
� Press the softkey 5 assigned to
the �USER� display item.
� Press the softkey 5 assigned to
the display item of the equalizer (�EQ-1�, �EQ-2� or �EQ-3�) whose settings you want to change.
� repeatedly press the joystick 8 to
the left or right until the quality factor displayed after �Q� flashes.
� Adjust the quality factor by pressing the joystick 8 up or down. Note: Proceed in the same way with all the frequencies that you want to adjust. � Press the joystick OK 8 or the AUDIO button : to close the menu. The settings are saved.
� Press the softkey 5 assigned to
the display item of the equalizer band (�LOW1�, �LOW2�, �HIGH1�, �HIGH2� or �HIGH3�) whose setting you want to change. The top line displays the frequency in Hz, the level in dB and the quality factor �Q�. To select the frequency,
� repeatedly press the joystick 8 to
the left or right until the frequency flashes.
� Adjust the frequency that you want
to change by pressing the joystick 8 up or down. To adjust the level,
� repeatedly press the joystick 8 to
the left or right until the level displayed in front of �dB� flashes.
� Adjust the level for the frequency
by pressing the joystick 8 up or down.
